Are you building a new home, or remodeling your bathroom and don’t know how to choose a shower head that fits your needs?
When you arrive at the department store and start looking for a new shower head, you might be overwhelmed at the amount of choices (or lack of) you have to choose from. Buying the right one for your family will certainly make you think a couple of times before you make this decision; you don’t want to end up standing under a trickle of water, or showering in hot or cold water.
Before choosing a showerhead, it is important that you understand 2 things:
1. You should verify and understand how the hot water system works in your home. Some shower heads cannot be used with some heating systems.
Most homes in the US will have one of the three different plumbing systems installed:
- Gravity system - Pressurized system - Boiler system.
If you are not sure what kind of water system is installed in your home, please ask Benjamin Franklin of the Treasure Coast to perform a maintenance or routine check.
2. There are four basic categories to a shower (-mixer, power, electric and thermostatic-). Understanding your options and the right fit to choose from is very important in order to get the right one on your first try.
This type of shower includes, hot and cold water which is mixed before coming out of the shower head. Mixer shower fixtures come surface mounted, the pipework can be installed on the top of your existing surface, or flush mounted (for this kind of showers the valve is seen and the pipework is hidden behind the surface).
Mix showers work perfectly in shower cubicles where the pipes can be built into a wall. If you are interested in this type of shower you should take into consideration some showers will require high pressure systems in order to work effectively - If your home doesn’t have one, you could also consider buying a separate pump to increase the flow, but if your home does, please look out for the HP symbol (high pressure) on selected showers. Does it sound complicated? Please give us a call and schedule your appointment today at 1(877) 236 -1776. We can help you remove, install and repair any showers, faucets, pipe and all plumbing items.
- High Flow Rate - You usually get the right temperature. - You can find many options of shower mixers, that will allow you to adjust the temperature and flow
- Be careful to make sure it fits your water system before buying. - Mixer showers won’t increase the flow of water to your system. - The flow, and temperature of water may be affected by the use of toilet, cistern, etc.
These kind of showers work similar to Mixer Showers, but this one should include an integral pump to strengthen the ﬂow of water -built-in pump-, so they’re perfect for homes with low water pressure.
- Greater control over the water temperature and pressure. - Good performance even with low water pressure.
- They can only be installed in low pressure, tank feed systems. - A dedicated hot and cold supply of water is necessary. - Shouldn’t be used with a high pressure unvented system. - They could use a lot more water than other kind of showers
Electric showers can be used in any home, regardless of the plumbing system, and they’re top choice for homes with a high hot water demand. Electric showers only need cold water feed thru the mains because water is heated up as it passes through an integral heater.
- You don’t need a water cylinder to get warm water from the shower - You don’t have to pay to heat water that wasn’t used. - You get a good flow even when you have low water pressure. - Can be good for your energy bills - Electric Showers still work even when your boiler breaks down
- You probably get very hot water if the cold water supply is being used elsewhere in your house. - You will require a separate fuse for the electrical supply circuit.
These have a pre-set thermostat that keeps the water temperature consistent and will adjust it when needed. Some advanced thermostatic showers have features like cutting off the water supply when there is a failure in the flow.
Thermostatic showers can be installed in a shower bath or work as part of a concealed or exposed unit.
- Greater control over temperature - Comes is various designs - Ideal shower solution for houses with no showering facilities, such as older homes.
We hope our article on types of showers with “pros & cons” has given you a helpful insight into choosing a new shower head. If you are remodeling your bathroom and need a new shower head, any kind of repairs or plumbing installation give us a call, our plumbing professionals will be happy to assist you. We also offer a wide array of nozzles and shower heads with different levels of efficiency and spray settings. Call Benjamin Franklin Plumbers today for additional details.